Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the rear control arm of the Ford Focus 2.

Model: Ford Focus MK 2, Focus 2 - Years 2004-2011
Part: Control arm

To replace the rear control arm of the Ford Focus, we lift the car with a lift bridge, remove the wheel, place a hydraulic jack under the suspension attachment, clean the bolts to be unscrewed. We start by unscrewing the shock absorber bolt, unscrewing the stabilizer bar mounting elements, marking a sign on the crossbar and on the camber adjustment bolt with a chisel. We unscrew the bolt that secures the arm to the beam, unscrew the bolt that secures the arm to the joint. Slowly lower the jack and remove the spring with a lever, finally remove the old control arm, insert the new arm, reassemble the parts by proceeding backwards with the operation and tightening the bolts with a torque wrench. Repeat the operations on the other side.

Posted on 25 April 2025 by ScegliAuto

Video tutorial

Related tutorials

Front Suspension Wishbone Replacement
Front Suspension Wishbone Replacement
Ford Focus (2004-2011 / MK 2, Focus 2) If you hear noise coming from under the wheels while driving on uneven surfaces, it is likely that the rubber bushes, which are present in the suspen…
Instructions for Dismantling the Suspension Wishbone
Instructions for Dismantling the Suspension Wishbone
Ford Focus (2011-2018 / MK 3) The video shows the catastrophic failure of the suspension wishbone caused by the front wheel collision, which also damaged the wheel rim, the steeri…
Replacing the Rear Wiper Blade on Ford Focus
Replacing the Rear Wiper Blade on Ford Focus
Ford Focus (2004-2011 / MK 2, Focus 2) Are the wiper blades damaged? Here’s how to replace them. Grasp the rear wiper blade with your hands, gently pull it as shown in the video (without b…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos