Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the External Rear-View Mirror of the Fiat Stilo

Model: Fiat Stilo MK 1 - Years 2001-2010
Part: Side mirror

To perform this operation, turn the mirror to the widest position possible. This will give you more space to work comfortably during the extraction of the mirror. You need to grip it by the edge to pull away the entire mirror, which is attached by pressure clips. Once the mirror is removed, disconnect the connector at the back. Then, proceed with the installation of the new mirror, ensuring it is fitted correctly. Finally, retrace the steps described in reverse for reassembly.

Updated on 26 February 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Fiat Stilo (2001-2010 / MK 1) In a few simple steps, learn how to remove and replace the external wing mirror on the Fiat Stilo. First, open the front door and start by removing t…
Fiat Stilo (2001-2010 / MK 1) To find the OBD port of your Fiat Stilo, it only takes a few seconds. All you have to do is carefully read the following guide and then follow the va…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos