Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Rear Light Bulb on a Fiat Stilo

Model: Fiat Stilo MK 1 - Years 2001-2010
Part: Tail light bulb

In this video tutorial, you will learn how to remove and replace the rear light bulb on a Fiat Stilo. First, remove the rear light; open the boot and take off the side cover; now unscrew the fixing screws at the back of the light and disconnect the electrical connector of the bulb to extract the light from the outside. Next, unscrew the fixing screws of the bulb holder and separate it from the housing; access the bulbs, rotate them to remove and replace them!

Updated on 21 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Front Headlamp Bulb on the Fiat Stilo
Replacing the Front Headlamp Bulb on the Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) In this guide, we will discover the instructions that will allow you to remove and replace the front headlamp bulb on the Fiat Stilo. First, open the…
Replacing the Left Front Headlight Bulb on a Fiat Stilo
Replacing the Left Front Headlight Bulb on a Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) To replace the left front headlight bulb on a Fiat Stilo, you must first remove the battery and then the battery tray: this will provide enough space…
Replacing the Front Headlamp Bulb on a Fiat Stilo
Replacing the Front Headlamp Bulb on a Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) In today's tutorial, you will see how to remove and replace the front headlamp bulb on a Fiat Stilo. First, open the bonnet and remove the upper Torx…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos