Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Headlamp Bulb on the Fiat Stilo

Model: Fiat Stilo MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Headlight bulb

Video tutorial

In this guide, we will discover the instructions that will allow you to remove and replace the front headlamp bulb on the Fiat Stilo. First, open the car's bonnet and start by removing the plastic protection cap of the bulbs, if easily accessible; then disconnect the electrical connector of the light by releasing the metal clip to remove it, as shown in the video.

At this point, install the new dipped beam bulb of the correct type and with the same fitting; reassemble and connect the bulb, finally securing the plastic cap.


Posted on 24 July 2026 by ScegliAuto


Related tutorials

Replacing the Left Front Headlight Bulb on a Fiat Stilo
Replacing the Left Front Headlight Bulb on a Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) To replace the left front headlight bulb on a Fiat Stilo, you must first remove the battery and then the battery tray: this will provide enough space…
How to Change the Front Headlight Bulb on a Fiat Stilo
How to Change the Front Headlight Bulb on a Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) To replace the front headlight bulbs on a Fiat Stilo, open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it…
Replace the Front Headlight Bulbs on Fiat Stilo
Fiat Stilo (2001-2010 / MK 1) Replace the front headlight bulbs on the Fiat Stilo. Here’s how to change the bulbs. Using a suitable screwdriver, remove the plastic cover at the bo…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos