Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Jeep Vari
    4. : Checks and maintenance

Jeep Jeep Various - Checks and maintenance

Checks And Maintenance Jeep Jeep Various ( / )

Jeep Jeep Various
DIY Bearings and Seals for Jeep Willis
The procedure for replacing the bearings and seals on the front axle of a Jeep Willis is complex, but why not give it a try? Ensure the axle is already …Read all…
Posted on 3 June 2026 by ScegliAuto
Jeep Jeep Various
Where to Find the OBD2 Port on the Jeep Liberty
In this new guide, we will help you find the OBD2 port located inside the cabin of your 2012 Jeep Liberty. First of all, ensure the vehicle is parked safely on …Read all…
Posted on 15 February 2026 by ScegliAuto
Jeep Jeep Various
How do you reset the uConnect system of Jeep?
In order to reset the uConnect system of Jeep vehicles, you need to turn on the dashboard by inserting the ignition key into the corresponding slot. Once the …Read all…
Posted on 12 May 2025 by ScegliAuto
Jeep Jeep Various
How do you reset the onboard computer of a Jeep?
In order to reset the onboard computer of Jeep vehicles, you need to connect a diagnostic tool to the OBD port of the vehicle: this port can be found on the …Read all…
Posted on 9 March 2025 by ScegliAuto
Jeep Jeep Various
How does the uConnect system of Jeep work?
In order to use the Jeep uConnect system, you need to download the specific application on your smartphone. Once the application is installed, you can log in …Read all…
Posted on 23 October 2024 by ScegliAuto
Body (1) Control unit (1) Key (3) Timing belt (1) Checks and maintenance (5) Air filter (2) Headlight bulb (1) Tail light bulb (1) Radiator (1) Wheel (1) Fuse box (2) Warning light – error code (2) (1) Tire pressure warning light (1) Service warning light (3) Fuel cap (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos