Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Patriot
    4. : License plate light

Jeep Patriot - License plate light

License Plate Light Jeep Patriot (2007-2017 / mk 1)

Jeep Patriot (2007-2017 / MK 1)
Replacement of the license plate lights of the Jeep Patriot
Today we will discover the instructions that will allow us to disassemble and replace the license plate bulbs of the Jeep Patriot, in simple and quick steps. …Read all…
Posted on 2 October 2024 by ScegliAuto
Jeep Patriot (2007-2017 / MK 1)
Replacing the Number Plate Light on a Jeep Patriot
Want to replace the number plate bulbs? Here's how to remove the number plate bulbs on the Patriot. Open the boot lid, and using a screwdriver, detach the …Read all…
Posted on 28 May 2026 by ScegliAuto
Jeep Patriot (2007-2017 / MK 1)
Number Plate Light Bulb Replacement
Open the boot and lift the lid until you can see the two small light units for the number plate. Using a screwdriver, gently push the clip to avoid damaging …Read all…
Posted on 2 March 2026 by ScegliAuto
Speaker (2) Car stereo (1) Battery (3) Air vents (1) Body (1) Checks and maintenance (2) Dashboard (1) Cabin air filter (2) Oil filter (1) Light bulb (1) Headlight bulb (2) Tail light bulb (2) License plate light (3) (1) Engine oil (3) Door trim panel (3) Rear bumper (1) Hydraulic pistons (1) Shift knob (3) Fuel pump (1) Wheel (2) Fuse box (8) Side mirror (1) Service warning light (12) Fuel cap (1) Thermostat (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos