Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Patriot
    4. : Door trim panel

Jeep Patriot - Door trim panel

Door Trim Panel Jeep Patriot (2007-2017 / mk 1)

Jeep Patriot (2007-2017 / MK 1)
How to Remove the Rear Door Panel of a Jeep Patriot
In this video, learn how to remove the rear door panel of a Jeep Patriot: start with the screw located inside the door handle, then the screw found at the …Read all…
Posted on 2 August 2026 by ScegliAuto
Jeep Patriot (2007-2017 / MK 1)
Removing the Door Panel on a Jeep Patriot
How to remove the door panel on a Jeep Patriot? Start by removing the fixing plastics to take off the door panel. Unscrew the screws located in the upper lever …Read all…
Posted on 15 May 2026 by ScegliAuto
Jeep Patriot (2007-2017 / MK 1)
Removing the Left Door Panel on Jeep Patriot
Is the left door panel due for replacement? Here’s how to remove it on a Jeep Patriot. Unscrew the screws located in the space of the upper door release …Read all…
Posted on 9 April 2026 by ScegliAuto
Speaker (2) Car stereo (1) Battery (3) Air vents (1) Body (1) Checks and maintenance (2) Dashboard (1) Cabin air filter (2) Oil filter (1) Light bulb (1) Headlight bulb (2) Tail light bulb (2) License plate light (3) (1) Engine oil (3) Door trim panel (3) Rear bumper (1) Hydraulic pistons (1) Shift knob (3) Fuel pump (1) Wheel (2) Fuse box (8) Side mirror (1) Service warning light (12) Fuel cap (1) Thermostat (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos