Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Door Panel of a Jeep Patriot

Model: Jeep Patriot MK 1 - Years 2007-2017
Part: Door trim panel

In this video, learn how to remove the rear door panel of a Jeep Patriot: start with the screw located inside the door handle, then the screw found at the opening handle on the front side of the door. Next, cut the speaker grille, where there are additional screws holding the panel in place. Once you have removed this first small panel, proceed with the screws located behind the first panel, which allow you to unscrew the back part of it. Once these screws are removed, this panel will also come off and the job will be complete.

Updated on 2 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Light Bulb on the Jeep Patriot
How to Replace the Rear Light Bulb on the Jeep Patriot
Jeep Patriot (2007-2017 / MK 1) In this new guide aimed at all of you who own a Jeep Patriot, we will explain step by step how to replace the rear light bulb yourself. First, ensure…
Removing the Door Panel on a Jeep Patriot
Removing the Door Panel on a Jeep Patriot
Jeep Patriot (2007-2017 / MK 1) How to remove the door panel on a Jeep Patriot? Start by removing the fixing plastics to take off the door panel. Unscrew the screws located in the u…
Removing the Left Door Panel on Jeep Patriot
Removing the Left Door Panel on Jeep Patriot
Jeep Patriot (2007-2017 / MK 1) Is the left door panel due for replacement? Here’s how to remove it on a Jeep Patriot. Unscrew the screws located in the space of the upper door rele…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos