Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Door Panel on a Jeep Patriot

Model: Jeep Patriot MK 1 - Years 2007-2017
Part: Door trim panel

How to remove the door panel on a Jeep Patriot? Start by removing the fixing plastics to take off the door panel. Unscrew the screws located in the upper lever space of the door opening and the screws in the handle (after removing the plastic screw covers). Remove the mid-panel covering plastic, unscrew the remaining screws on the door panel, and detach the retaining clips. Pull off the cover panel by hand and unclip it from the door (disconnect the power wiring and the opening cable). Fit a new cover panel if the one removed is damaged.

Updated on 10 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Left Door Panel on Jeep Patriot
Removing the Left Door Panel on Jeep Patriot
Jeep Patriot (2007-2017 / MK 1) Is the left door panel due for replacement? Here’s how to remove it on a Jeep Patriot. Unscrew the screws located in the space of the upper door rele…
How to Remove the Rear Door Panel of a Jeep Patriot
How to Remove the Rear Door Panel of a Jeep Patriot
Jeep Patriot (2007-2017 / MK 1) In this video, learn how to remove the rear door panel of a Jeep Patriot: start with the screw located inside the door handle, then the screw found a…
How to disassemble the speaker of the Jeep Patriot
How to disassemble the speaker of the Jeep Patriot
Jeep Patriot (2007-2017 / MK 1) Below we will see the instructions that will allow us to disassemble and replace the front door speaker of the Jeep Patriot. First, we open the front…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos