|
Do it yourself
| |||
| ||||
Replacing the Cabin Air Filter in a Jeep Renegade
Model: Jeep Renegade
MK 1, BU, 520
- Years:
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Video tutorial
Follow these steps to replace the cabin air filter in your Jeep Renegade. Sit in the front passenger seat, use a plastic wedge to remove the side panel of the dashboard, and unscrew the screw on the edge with a T25 Torx screwdriver. Using the same screwdriver, unscrew the three screws at the base of the glove compartment and the three found on the upper edge once opened. With the glove compartment removed, you can access the filter box cover, which can be opened after removing the screw that secures it. Pull out the old filter and insert the new one, paying attention to the direction of airflow. Refit the cover and secure it with its screw, reposition the glove compartment, screw in the screws, and replace the side panel.
Updated on 24 October 2026 by ScegliAuto
Related tutorials
Jeep Renegade
(2014-2026 /
MK 1, BU, 520)
In this guide, we will see the instructions that will allow us to replace the cabin air filter of the Jeep Renegade. First, let's get inside the cabi…
Jeep Renegade
(2014-2026 /
MK 1, BU, 520)
To replace the cabin air filter in your Jeep Renegade by yourself, you must follow the steps described in the following guide. First, purchase a new …
Jeep Renegade
(2014-2026 /
MK 1, BU, 520)
In the 2016 Jeep Renegade, the cabin air filter is located under the dashboard on the passenger side, behind the glove compartment. The position of t…
Other guides you may be interested in
|
How to reset the Service light on a 2019 Jeep Renegade?
The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.201
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
