Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the storage drawer of the Jeep Grand Cherokee

Model: Jeep Grand Cherokee MK 2, WJ - Years 1998-2004
Part: Glove compartment

Following these simple steps, we will see how to disassemble and remove the glove box of the Jeep Grand Cherokee. First of all, we get into the vehicle on the passenger side and start by opening the glove box; we will find the fixing screws on the side of it, which we will then unscrew, as shown in the video. In this way, it will be possible to remove the glove box, disconnecting the small electrical connector of the bulb; we carry out the repair or, if necessary, the replacement of the glove box, applying the reverse procedure for reassembly!

Posted on 20 October 2024 by ScegliAuto

Video tutorial

Related tutorials

Where are the Fuses on a Jeep Grand Cherokee?
Jeep Grand Cherokee (1998-2004 / MK 2, WJ) The fuses on the Jeep Grand Cherokee are located within specific fuse boxes installed in the vehicle: this car model has two. The first is located in…
Removing the Glove Box from a Jeep Grand Cherokee
Removing the Glove Box from a Jeep Grand Cherokee
Jeep Grand Cherokee (2004-2010 / WK, MK 3, WH) This guide shows you how to remove and replace the glove box of the Jeep Grand Cherokee, following the instructions below. First, get inside the vehi…
How to Replace the Cabin Filter on Jeep Grand Cherokee?
How to Replace the Cabin Filter on Jeep Grand Cherokee?
Jeep Grand Cherokee (2010-2021 / WK2, MK 4) To replace the cabin filter on the Jeep Grand Cherokee, open the glove compartment from the passenger side and push sideways so that the compartment …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos