Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Glove Compartment from a Jeep Wrangler?

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Glove compartment

See other generations:
Video tutorial

To remove the glove compartment from a Jeep Wrangler, open the glove compartment located on the passenger side of the dashboard. Once the compartment is open, you can access the internal clips located on both sides.

By removing these clips, you can completely free the compartment, pulling it out from its housing. Once the old compartment is fully removed, you can insert the new one, securing it with the appropriate side clips.


Updated on 8 August 2026 by ScegliAuto


Related tutorials

How to replace the cabin air filter of the 2013 Jeep Wrangler
How to replace the cabin air filter of the 2013 Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) If you need to replace the cabin air filter in your Jeep Wrangler on your own, then all you have to do is pay attention to the following guide and fo…
How to Replace the Pollen Filter on a Jeep Wrangler JK
How to Replace the Pollen Filter on a Jeep Wrangler JK
Jeep Wrangler (2007-2018 / JK, MK 3) In this video tutorial, see how to replace the pollen filter on a Jeep Wrangler JK by following simple procedures. The replacement takes about 30 min…
How to Reset the "Service" Light on a Jeep Wrangler
How to Reset the "Service" Light on a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) Before you can begin, sit in the driver's seat of your Jeep Wrangler. Start by activating the instrument cluster without starting the engine, and wai…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos