Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Pollen Filter on a Jeep Wrangler JK

Model: Jeep Wrangler JK, MK 3 - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018
Part: Cabin air filter

See other generations:
Video tutorial

In this video tutorial, see how to replace the pollen filter on a Jeep Wrangler JK by following simple procedures. The replacement takes about 30 minutes.

Replace the pollen filter after driving 9,300 miles or at least once a year. You can find the pollen filter behind the glove compartment, so to remove the glove compartment, press the buttons located on each side of the opening; carefully and slowly remove the glove compartment.

Now insert the key, start the vehicle, and set it to recirculation mode. This procedure will cause the fan behind the air grille to expand and open; then turn off the engine and remove the key. Remove the pollen filter from its housing and position the new filter according to the arrows indicating the airflow.


Updated on 4 August 2026 by ScegliAuto


Related tutorials
…
How to replace the cabin air filter of the Jeep Wrangler 4
How to replace the cabin air filter of the Jeep Wrangler 4
Jeep Wrangler (2018-2026 / JL, MK 4) If you do not know what steps you need to take to replace the air filter inside the cabin of your Jeep Wrangler Mk4, do not worry because in the foll…
How to Remove and Replace the Diesel Filter on a Jeep Wrangler
How to Remove and Replace the Diesel Filter on a Jeep Wrangler
Jeep Wrangler (2007-2018 / JK, MK 3) Follow these steps to remove and replace the diesel filter on a Jeep Wrangler: lift the vehicle on a column lift, locate the diesel filter as shown i…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos