Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Wrangler
    4. : How to remove and replace the diesel filter on Jeep Wrangler

Jeep Wrangler - Video tutorial

Model: Jeep Wrangler MK 3, JK - Years 2007-2018
Part: Diesel filter
Operation: How to remove and replace the diesel filter on Jeep Wrangler

Let's see how to remove and replace the diesel filter on the Jeep Wrangler: we lift the car on a column bridge, we identify the diesel filter as in the video. With a socket wrench we unscrew the locking pins located near the container (disconnect the cables and the various tubes from the filter) where the diesel filter is located. Once the filter has been removed, remove it from the car (replace it with a new filter). Finally we reassemble the filter to the attached container of the diesel filter (we connect pipes and cables) and tighten the appropriate pins. We close the front hood finally.


Posted on 22 October 2023 by ScegliAuto



How to replace the air filter on the Jeep Wrangler 3
Jeep Wrangler (2007-2018 / MK 3, JK) The engine air filter inside your third series Jeep Wrangler (year 2008-2018) must be replaced periodically in order to avoid any abnormal overheatin
How do you replace the cabin filter on the Jeep Wrangler?
Jeep Wrangler (2007-2018 / MK 3, JK) In order to replace the passenger compartment filter of the Jeep Wrangler, you need to open the glove box located on the passenger side, removing the
How to replace the cabin filter in the Jeep Wrangler?
Jeep Wrangler (2007-2018 / MK 3, JK) In this video we can see how to replace the cabin filter in the Jeep Wrangler, a very simple and fast operation. The filter is positioned behind the

How to set the clock on the Yamaha Xmax 300

To change the time of the Yamaha Xmax 300, keep the "trip" button pressed, at the same time turn the ignition to "on"; release the "trip" button when the time starts flashing; briefly press the "trip" button to set the time; press and hold for a few seconds to confirm and move on to the minutes; briefly press the same button to set the minutes; we long press the same "trip" button to confirm; at this point in the meantime that we hold down the minutes stop flashing the time has been saved correctly and we can turn off the instrument panel.

Watch the video!


by ScegliAuto

More videos