|
Do it yourself
| |||
| ||||
How to Reset the "Service" Light on a Jeep Renegade?
Model: Jeep Renegade
MK 1, BU, 520
- Years:
2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Video tutorial
To reset the "Service" light on a Jeep Renegade, start by turning on the ignition without starting the engine. Use the buttons on the indicator stalk to access the onboard computer menu. With these controls, navigate through the display options until you locate the section dedicated to maintenance or service intervals. Once you reach the correct menu, select the option to reset the maintenance interval. The system may require confirmation. In this case, hold down the button to confirm the reset and wait for the display to signal that the operation has been correctly executed. The "Service" light will turn off, indicating that the reset has been completed successfully and that the new maintenance interval has been set. After performing the operation, turn off and restart the ignition to ensure that the light is no longer active. If the "Service" light remains on, you may need to repeat the procedure, ensuring that all steps are executed precisely to complete the reset correctly.
Updated on 31 October 2026 by ScegliAuto
Related tutorials
Jeep Renegade
(2014-2026 /
MK 1, BU, 520)
Before you can begin, sit in the driver's seat of your Jeep Renegade. Start by pressing the vehicle's ignition button, which will turn on the instrum…
Jeep Renegade
(2014-2026 /
MK 1, BU, 520)
Before you can begin, sit in the driver's seat of your Jeep Renegade. Start by pressing the vehicle's ignition button once, activating the instrument…
Jeep Renegade
(2014-2026 /
MK 1, BU, 520)
Before you begin, sit in the driver's seat of your Jeep Renegade. Start by activating the instrument cluster without starting the engine. While doing…
Other guides you may be interested in
|
How to reset the Service light on a 2019 Jeep Renegade?
The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.506
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
