Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the LPG filter of the Jeep Renegade

Model: Jeep Renegade - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Diesel fuel filter

Video tutorial

Today we will explain how to replace the LPG filter of the Jeep Renegade on your own. Before replacing the diesel filter, it is necessary to close the gas cylinder, located inside the trunk, to avoid gas leaks during the replacement. We then open the trunk of the vehicle and remove the carpet under which the gas cylinder is positioned, and close the valve.

We unscrew the nuts that secure the cover and proceed with the filter replacement. Once the replacement is done, we open the trunk of the vehicle to open the valve on the gas cylinder and circulate the gas for the vehicle to operate.


Posted on 2 May 2025 by ScegliAuto


Related tutorials

How to replace the air filter of the Jeep Renegade
How to replace the air filter of the Jeep Renegade
Jeep Renegade (2014-2023 / ) In this new mini guide of ours, we will discover together the various steps that you need to follow if you want to replace the engine air filter of y…
How to replace the cabin air filter of the Jeep Renegade
How to replace the cabin air filter of the Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) To replace the cabin air filter in your Jeep Renegade by yourself, you must follow the steps described in the following guide. First, purchase a new …
How to Replace the Cabin Air Filter in the 2019 Jeep Renegade
How to Replace the Cabin Air Filter in the 2019 Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Regularly replacing the cabin air filter is very important as it ensures better air quality inside the car, especially when using the air conditionin…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos