Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the radio of the Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Car stereo

Replacing the radio in the Jeep Renegade is a simple and quick operation to be carried out independently. To perform this simple operation, we must first remove the plastic cover of the radio and then unscrew the four screws that hold the radio in place, so that it can be removed. Once the connector is disconnected, we can proceed with the replacement. We connect the connector to the new radio and insert it into the housing; we screw in the locking screws and mount the cover. We turn on the radio to check its operation, it may be necessary to enter the unlock code found in the radio manual.

Posted on 15 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the car radio in the Jeep Renegade?
How to replace the car radio in the Jeep Renegade?
Jeep Renegade (2014-2023 / ) In this tutorial, we can see how to replace the car radio in the Jeep Renegade, an extremely simple and fast operation. First of all, make sure that …
How to Replace the Radio in a Jeep Renegade
How to Replace the Radio in a Jeep Renegade
Jeep Renegade (2014-2021 / ) In this video, you will learn how to remove the original radio from the Jeep Renegade and replace it with a new Android touch screen radio to moderni…
How to Remove and Replace the Radio in a Jeep Renegade
How to Remove and Replace the Radio in a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Follow these instructions to remove and replace the standard radio in a Jeep Renegade. First, get inside the vehicle and start by removing the plasti…

    Frequently Asked Questions

    • Jeep Renegade 2014-2026 - My Jeep Renegade screen does not turn on, what can it be? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos