Do it yourself
Frequently asked questions about cars and motorcycles

How to Remove and Replace the Radio in a Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Car stereo

Follow these instructions to remove and replace the standard radio in a Jeep Renegade. First, get inside the vehicle and start by removing the plastic trim around the radio using something thin. Then, unscrew the securing screws found on the sides, as shown in the video. At this point, remove the radio from the dashboard by disconnecting the electrical connectors at the back; apply the reverse procedure for reassembly!

Updated on 8 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Jeep Renegade (2014-2026 / 520, MK 1, BU) Before you can start, sit in the driver's seat of your Jeep Renegade. Using a thin but sturdy tool and leveraging it, begin by prying and removing th…
Jeep Renegade (2014-2023 / ) In this tutorial, we can see how to replace the car radio in the Jeep Renegade, an extremely simple and fast operation. First of all, make sure that …
Jeep Renegade (2014-2026 / 520, MK 1, BU) Replacing the radio in the Jeep Renegade is a simple and quick operation to be carried out independently. To perform this simple operation, we must f…

    Frequently Asked Questions

    • Jeep Renegade 2014-2026 - My Jeep Renegade screen does not turn on, what can it be? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos