Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the car radio in the Jeep Renegade?

Model: Jeep Renegade - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Car stereo

Video tutorial

In this tutorial, we can see how to replace the car radio in the Jeep Renegade, an extremely simple and fast operation. First of all, make sure that the key is not inserted, then, using a plastic spatula, unclip the radio frame by levering along the entire perimeter.

Next, unscrew the four screws just released using a Torx T25 key, grab the radio and remove it from the dashboard. At this point, we can disconnect the internal connector, insert the replacement, and reassemble everything following the exact reverse procedure.


Posted on 6 May 2025 by ScegliAuto


Related tutorials

How to Replace the Radio in a Jeep Renegade
How to Replace the Radio in a Jeep Renegade
Jeep Renegade (2014-2021 / ) In this video, you will learn how to remove the original radio from the Jeep Renegade and replace it with a new Android touch screen radio to moderni…
How to Remove and Replace the Radio in a Jeep Renegade
How to Remove and Replace the Radio in a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Follow these instructions to remove and replace the standard radio in a Jeep Renegade. First, get inside the vehicle and start by removing the plasti…
How do you replace the Jeep Renegade's car radio?
How do you replace the Jeep Renegade's car radio?
Jeep Renegade (2014-2026 / MK 1, BU, 520) Replacing the radio of the Jeep Renegade is a less complicated job than one might imagine, and as proof of this we have the video tutorial attached h…

How to Open the Bonnet of a Toyota C-HR

To open the bonnet of a Toyota C-HR, get inside the vehicle and lift the lever with the bonnet symbol located under the steering wheel. After lifting the lever, you will notice that the bonnet rises a few centimetres. Position yourself in front of the bonnet, insert your hand into the gap, and move the small internal lever from right to left, then lift the bonnet. You can keep the bonnet open during maintenance by positioning it on the support rod. To close the bonnet, remove the support rod and let it drop back down.

Watch the video!


by ScegliAuto

More videos