Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil light on the Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Service warning light

In this article, we show you how to reset the oil change light, or the service light, of the Jeep Renegade in case the reset is not performed by the workshop that carried out the service. To reset the light, you need to turn on the ignition without starting the engine, so you must press the start button without pressing the brake. Once the ignition is on, when the message regarding the oil change appears, press the accelerator pedal three times. After that, you need to turn off the ignition and start the engine by pressing the start button and the brake again. Now the reset procedure will be complete.

Posted on 23 January 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Light on a Jeep Renegade
How to Reset the Oil Light on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Before you start, sit in the driver's seat of your Jeep Renegade. Begin by pressing the vehicle's ignition button once to activate the instrument clu…
How to Reset the Oil Light on a Jeep Renegade
How to Reset the Oil Light on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) To reset the oil light on your Jeep Renegade, simply follow this guide step by step. First, enter the cabin and turn on the instrument panel, then pr…
How to Reset the Oil Light on the Jeep Renegade
How to Reset the Oil Light on the Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) To manually reset the engine oil light on your Jeep Renegade, it only takes a few seconds. The necessary procedure is quite simple, and if you follow…

Other guides you may be interested in

    Frequently Asked Questions

    • Jeep Renegade 2014-2026 - Why did the oil change light come on in the Jeep Renegade? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos