Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light on a Jeep Renegade

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Tail light

Video tutorial

How do you remove the rear light on a Jeep Renegade? Open the boot lid, unscrew the fastening screws located at the side of the light. Detach the rear light from its housing once all screws are removed (disconnect the power connectors) and remove it from the bodywork.

Replace the damaged bulbs with new ones by unscrewing the bulb holder (ensure the size and voltage are the same). Finally, refit the new light with the screws and reconnect the power connectors.

Test the bulbs to ensure they function correctly.


Updated on 15 March 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Number Plate Light Bulb on a Jeep Renegade
How to Replace the Rear Number Plate Light Bulb on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Before you begin, open the tailgate of your Jeep Renegade. Start by unclipping and removing the rear number plate light from the tailgate, using a fl…
How to Replace the Rear Light Bulb on the Jeep Renegade
How to Replace the Rear Light Bulb on the Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) If the bulb of one of the rear lights on your Jeep Renegade has stopped working suddenly, do not worry as this guide provides all the necessary steps…
Removing the rear light on Jeep Renegade
Removing the rear light on Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) In today's video, we will see how to remove the rear light on a Jeep Renegade, in simple steps. First, open the boot and remove the side plastic cove…

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos