Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Number Plate Light Bulb on a Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: License plate light

Before you begin, open the tailgate of your Jeep Renegade. Start by unclipping and removing the rear number plate light from the tailgate, using a flathead screwdriver to lever it out. Then, disconnect the electrical connector. This will give you access to the blown bulb. Proceed by twisting the bulb to remove it from the rear number plate light, and you will have completed the removal. To fit the new bulb for the rear number plate light on your Jeep Renegade, simply follow these steps in reverse, and you will have completed the replacement.

Updated on 6 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Number Plate Lights on the Jeep Renegade
How to Replace the Number Plate Lights on the Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Today we will see the information that will allow us to remove and replace the number plate bulbs on the Jeep Renegade. First, move to the rear of th…
How to Remove the Number Plate Light Unit on a Jeep Renegade
How to Remove the Number Plate Light Unit on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) How do you replace the number plate light bulb on a Jeep Renegade? Use a screwdriver or plastic trim tool to remove the number plate light located in…
Replacing the number plate lights on the Jeep Renegade
Replacing the number plate lights on the Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In this video tutorial, you will see the main steps to disassemble and replace the rear number plate bulbs on the Jeep Renegade, following the instru…

How to Open the Bonnet on the Lancia Y

To open the bonnet on this vehicle, follow these simple instructions: first, open the driver's door and locate the lever positioned just below the dashboard, marked with an image of the vehicle with the bonnet open. Pull this lever towards you until you hear a "click" indicating the bonnet is released. Next, exit the cabin and stand in front of the bonnet to disengage the safety catch and complete the opening. To do this, slightly lift the bonnet, locate the yellow lever underneath, and pull it to the left to fully release and open the bonnet.

Watch the video!


by ScegliAuto

More videos