Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Number Plate Lights on the Jeep Renegade

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: License plate light

Video tutorial

Today we will see the information that will allow us to remove and replace the number plate bulbs on the Jeep Renegade. First, move to the rear of the vehicle and start by prying on the side of the light unit to detach it from the tailgate; then disconnect the electrical connector of the bulb to remove it and replace it with the new one, of the correct type and with the same fitting, as shown in the video.

At this point, remount the light unit on the tailgate, similarly replacing the other number plate bulb!


Posted on 18 February 2026 by ScegliAuto


Related tutorials

Replacing the number plate lights on the Jeep Renegade
Replacing the number plate lights on the Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) In this video tutorial, you will see the main steps to disassemble and replace the rear number plate bulbs on the Jeep Renegade, following the instru…
Replacing the Number Plate Lights on a Jeep Renegade
Replacing the Number Plate Lights on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) In this video, learn how to replace the number plate bulbs on a Jeep Renegade. Use a screwdriver to remove the number plate light unit located in the…
How to Replace the Rear Number Plate Light Bulb on a Jeep Renegade
How to Replace the Rear Number Plate Light Bulb on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Before you begin, open the tailgate of your Jeep Renegade. Start by unclipping and removing the rear number plate light from the tailgate, using a fl…

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos