Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the number plate lights on the Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: License plate light

In this video tutorial, you will see the main steps to disassemble and replace the rear number plate bulbs on the Jeep Renegade, following the instructions below. First, remove the number plate light cover by prying at the sides with something thin; then disconnect the electrical connector and the bulb from the cover, as illustrated in the video. Replace the bulb with a new one, or install a new LED light kit (as in this case); apply the reverse procedure for reassembly!

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Number Plate Lights on the Jeep Renegade
How to Replace the Number Plate Lights on the Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Today we will see the information that will allow us to remove and replace the number plate bulbs on the Jeep Renegade. First, move to the rear of th…
Replacing the Number Plate Lights on a Jeep Renegade
Replacing the Number Plate Lights on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In this video, learn how to replace the number plate bulbs on a Jeep Renegade. Use a screwdriver to remove the number plate light unit located in the…
How to Replace the Number Plate Lights on a Jeep Renegade
How to Replace the Number Plate Lights on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In today's video, we will see how to replace the number plate bulbs on a Jeep Renegade. First, obtain the correct units, specifically the W5W. If you…

How to Replace the Remote Battery for the Volvo XC40?

In this tutorial, you will see how to replace the battery in the remote for the Volvo XC40, a very simple and quick operation. For this, you will need a replacement battery of type CR2032 and possibly a small flathead screwdriver. First, remove the front cover by pressing the button on the metal ring, then locate the second button, press it as well, and remove the opposite cover. Next, open the circular cap, take out the old battery, and insert the new one in the opposite direction. Finally, reassemble everything.

Watch the video!


by ScegliAuto

More videos