Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Jeep Renegade?

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Light bulb

Video tutorial

Hello, today’s task is to replace the front headlamp bulb on your Jeep Renegade. Start by opening the front bonnet.

Next, unclip and remove the inner cover of the blown bulb. Once done, rotate the base of the blown bulb counter-clockwise to extract it from the headlamp.

At this point, disconnect the corresponding electrical connector. After completing this step, you will have successfully disassembled the old bulb.

To fit the new bulb, follow these steps in reverse, and you will have completed the replacement.


Updated on 30 October 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on a Jeep Renegade?
How to Replace the Front Headlamp Bulb on a Jeep Renegade?
Jeep Renegade (2014-2026 / MK 1, BU, 520) To replace the front headlamp bulbs on a Jeep Renegade, open the bonnet to access the engine bay and remove the circular cover at the rear of the hea…
How to Replace the Front Headlamp Bulb on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) To correctly replace the front headlamp bulb on your Jeep Renegade, it only takes a few minutes. First, unlock the front bonnet using the button loca…
Replacing the front headlamp bulb on a Jeep Renegade
Replacing the front headlamp bulb on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Replacing the front headlamp bulb is a very simple task; here’s how to do it. Raise the front bonnet and gently pull off the rear cover of the headla…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos