Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlamp Bulb on a Jeep Renegade?

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Light bulb

To replace the front headlamp bulbs on a Jeep Renegade, open the bonnet to access the engine bay and remove the circular cover at the rear of the headlamp. Once the cover is removed, you can pull the bulb out from its housing and disconnect it from the connector. The new bulb should then be connected to its connector and inserted into the housing, turning it clockwise to secure it. After installing the new bulb, close the headlamp with the cover and shut the bonnet.

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulb on a Jeep Renegade?
How to Replace the Front Headlight Bulb on a Jeep Renegade?
Jeep Renegade (2014-2021 / ) To replace the front headlight bulb on the Jeep Renegade, open the bonnet to access the rear of the headlight corresponding to the bulb that needs re…
How to Replace the Front Headlamp Bulb on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) To correctly replace the front headlamp bulb on your Jeep Renegade, it only takes a few minutes. First, unlock the front bonnet using the button loca…
How to Replace the Front Headlight Bulb on Jeep Renegade
How to Replace the Front Headlight Bulb on Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In this video, we will see how to remove and replace the front headlight bulb on a Jeep Renegade in simple steps. First, open and lift the bonnet of …

Other guides you may be interested in

    Frequently Asked Questions

    • Jeep Renegade 2014-2026 - How to change front turn signal bulb on Jeep Renegade? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos