Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulb on a Jeep Renegade?

Model: Jeep Renegade - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Headlight bulb

Video tutorial

To replace the front headlight bulb on the Jeep Renegade, open the bonnet to access the rear of the headlight corresponding to the bulb that needs replacing. Here, you will find a circular cover that needs to be removed, giving access to the bulb: this can then be disconnected from its connector and replaced with a new spare part.

After the new bulb is connected, insert it back into its housing and close everything with the circular cover of the inner part of the headlight.


Updated on 12 June 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlamp Bulb on a Jeep Renegade?
How to Replace the Front Headlamp Bulb on a Jeep Renegade?
Jeep Renegade (2014-2026 / MK 1, BU, 520) Hello, today’s task is to replace the front headlamp bulb on your Jeep Renegade. Start by opening the front bonnet. Next, unclip and remove the inner…
Changing the Headlight Bulbs on a Jeep Renegade
Changing the Headlight Bulbs on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Do you want to change the headlight bulbs on a Jeep Renegade? Follow these steps. Open the bonnet by pulling the lever located at the bottom right of…
How to Replace the Front Headlamp Bulb on a Jeep Renegade?
How to Replace the Front Headlamp Bulb on a Jeep Renegade?
Jeep Renegade (2014-2026 / MK 1, BU, 520) To replace the front headlamp bulbs on a Jeep Renegade, open the bonnet to access the engine bay and remove the circular cover at the rear of the hea…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos