Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Changing the Headlight Bulbs on a Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Light bulb

Do you want to change the headlight bulbs on a Jeep Renegade? Follow these steps. Open the bonnet by pulling the lever located at the bottom right of the dashboard and secure it. Locate the inspection cap of the headlight (at the rear of the headlight) and remove it. Pull out the bulb holder from the front headlight and extract the damaged bulb using a screwdriver. Fit the new bulb (ensure it is the correct type and size) and insert the bulb holder back into the headlight housing. Finally, close the headlight with the inspection cap. Repeat the same steps on the other headlight. Test the lights to ensure they are functioning correctly.

Updated on 28 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulbs on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Learn how to replace the front headlight bulbs on a Jeep Renegade. Open the front bonnet by pulling the lever located at the bottom right of the dash…
How to Replace the Front Headlight Bulbs of a Jeep Renegade
How to Replace the Front Headlight Bulbs of a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Do you want to replace the front headlight bulbs of a Jeep Renegade? Here’s how to proceed: open the front bonnet by pulling the lever located at the…
How to change the headlamp bulb on the Jeep Renegade
How to change the headlamp bulb on the Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In this video, see how to change the headlamp bulb on the Jeep Renegade: open the front bonnet, and you will see that the headlights have caps availa…

Other guides you may be interested in

    Frequently Asked Questions

    • Jeep Renegade 2014-2026 - How to change front turn signal bulb on Jeep Renegade? Read answer

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos