Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulb on a Jeep Renegade?

Model: Jeep Renegade - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Headlight bulb

Video tutorial

To replace the front headlight bulb on a Jeep Renegade, open the bonnet to access the components inside the engine bay: here you will find the circular inner cover panel. By removing this panel, you can proceed to pull the bulb from its socket, disconnecting the corresponding connector as well.

At this point, connect the new bulb to the connector and insert it into the headlight: you can now check that everything works correctly after the replacement.


Posted on 10 November 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulb on a Jeep Renegade?
How to Replace the Front Headlight Bulb on a Jeep Renegade?
Jeep Renegade (2014-2021 / ) To replace the front headlight bulb on the Jeep Renegade, open the bonnet to access the rear of the headlight corresponding to the bulb that needs re…
How to Replace the Front Headlamp Bulb on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) To correctly replace the front headlamp bulb on your Jeep Renegade, it only takes a few minutes. First, unlock the front bonnet using the button loca…
How to Replace the Front Headlamp Bulb on a Jeep Renegade?
How to Replace the Front Headlamp Bulb on a Jeep Renegade?
Jeep Renegade (2014-2026 / MK 1, BU, 520) To replace the front headlamp bulbs on a Jeep Renegade, open the bonnet to access the engine bay and remove the circular cover at the rear of the hea…

Other guides you may be interested in

How to reset the Service light on a 2019 Jeep Renegade?

The Service light, depicted as a yellow spanner, illuminates as scheduled to remind the driver that it is time for scheduled maintenance. This means that the set mileage has been reached, or the expected time has passed. The procedure involves turning on the instrument cluster, pressing the accelerator three times, and then turning off the ignition. After this, keep the brake pressed, turn the ignition back on, and then turn it off again. Upon the next ignition, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos