Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the headlamp bulb on the Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Headlight

In this video, see how to change the headlamp bulb on the Jeep Renegade: open the front bonnet, and you will see that the headlights have caps available, just behind the front grille, making them easy to reach. Simply remove these caps to access the bulbs; be careful with the connectors holding the bulbs, and remember that touching the new bulb with bare hands will significantly shorten its lifespan. Always use disposable gloves. There is enough space to move your hands comfortably without damaging any components. Refit the cap, and the job is complete.

Updated on 28 June 2026 by ScegliAuto

Video tutorial

Related tutorials

Changing the Headlight Bulbs on a Jeep Renegade
Changing the Headlight Bulbs on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Do you want to change the headlight bulbs on a Jeep Renegade? Follow these steps. Open the bonnet by pulling the lever located at the bottom right of…
How to Replace the Front Headlamp Bulb on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) To correctly replace the front headlamp bulb on your Jeep Renegade, it only takes a few minutes. First, unlock the front bonnet using the button loca…
How to Replace the Front Headlight Bulbs on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Learn how to replace the front headlight bulbs on a Jeep Renegade. Open the front bonnet by pulling the lever located at the bottom right of the dash…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos