Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Front Grille on Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Grille

Open the bonnet and insert the support rod. Remove the T30 torx screws securing the upper radiator support. Next, remove the two T25 torx screws that secure the bonnet release lever. Now, proceed to remove the bolts securing the front bumper from above. This is also secured above the headlights with clips, which you will need to detach using a flat screwdriver. Now that everything is unscrewed, you can remove or simply move the bar located behind the bumper. This will give you space to work on the grille from inside the bonnet, where the rings are secured with silver clips: push them from the bonnet and, using a flat screwdriver from the outside, remove them.

Updated on 4 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Air Vents from the Centre Console of a Jeep Renegade
How to Remove the Air Vents from the Centre Console of a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Before you start, sit in the driver's seat of your Jeep Renegade. Begin by prising off and removing the radio frame. Next, remove the radio itself by…
How to Modify the Front Grille on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Here’s how to modify the front grille on a Jeep Renegade (changing the central grille surround from chrome to black). Obtain aftermarket plastics (gr…
How to disassemble the grille and front bumper of the Jeep Renegade
How to disassemble the grille and front bumper of the Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In this guide, we will see the steps useful for disassembling and replacing the grille and front bumper of the Jeep Renegade. First of all, we open t…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos