Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front bumper of the Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Front bumper

In this video tutorial, you can see how to replace the front bumper of the Jeep Renegade. The first thing you need to do is use pliers to remove the pins located under the bonnet (there are two plastic clips holding it in place). At the back of the wing, there are also three bolts along the edge. Once you have removed the clips, take off the insulating part. Now, you need to remove the front wheel for better access. Inside the wing, there are about four or five nuts to remove. At the front of the lining, there are screws to take out. Once you have removed the screws, nuts, and bolts, you can take the wing out of its position. Now, remove the bolts and clips, and you can loosen the lower part of the wing. Be careful as it is attached to the headlamp housing, so take care not to break the tab when pulling it out.

Updated on 13 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the grille and front bumper of the Jeep Renegade
How to disassemble the grille and front bumper of the Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In this guide, we will see the steps useful for disassembling and replacing the grille and front bumper of the Jeep Renegade. First of all, we open t…
Removing Front Bumper on Jeep Renegade
Removing Front Bumper on Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In this video tutorial, you will learn how to remove the front bumper from a 2020 Jeep Renegade. This operation is not very complex but requires atte…
Instructions for Removing the Rear Bumper on Jeep Renegade
Instructions for Removing the Rear Bumper on Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In this tutorial, you will find instructions to remove the rear bumper of a Jeep Renegade. First, open the boot lid and remove the rear lights by uns…

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos