Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Rear Bumper on Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Rear bumper

In this tutorial, you will find instructions to remove the rear bumper of a Jeep Renegade. First, open the boot lid and remove the rear lights by unscrewing the fixing screws and disconnecting the electrical connectors of the bulbs; then remove the fixing screws found on both sides of the wheel arches to free the bumper from the sides. At this point, unscrew the additional screws located under the rear bumper and gently start to pull out the rear bumper.

Updated on 23 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing Front Bumper on Jeep Renegade
Removing Front Bumper on Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) In this video tutorial, you will learn how to remove the front bumper from a 2020 Jeep Renegade. This operation is not very complex but requires atte…
Rear Bumper Replacement for Jeep Renegade
Rear Bumper Replacement for Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Open the boot and remove the T30 Torx screws that secure the bumper to the boot. Next, move to the underside of the vehicle where you will find four …
How to Remove the Number Plate Light Unit on a Jeep Renegade
How to Remove the Number Plate Light Unit on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) How do you replace the number plate light bulb on a Jeep Renegade? Use a screwdriver or plastic trim tool to remove the number plate light located in…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos