Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Key Fob Battery on a Jeep Renegade

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Key

Video tutorial

Today, you will see instructions on how to disassemble and replace the battery of the key fob for a Jeep Renegade in simple steps. Take your key fob and remove the key by operating the lever; then, use a flat tool to pry open the sides and separate it into two parts.

At this point, access the circuit board and the battery, where you will remove it and replace it with a new one. Insert it the correct way and of the right type (in this case, a CR 2032 3V), and then reassemble the key fob as shown in the video!


Updated on 19 April 2026 by ScegliAuto


Related tutorials

How do you replace the battery of the Jeep Renegade remote control?
How do you replace the battery of the Jeep Renegade remote control?
Jeep Renegade (2014-2023 / ) To replace the battery of the Jeep Renegade remote control, you need to remove the key from the top of the device so that you can pry open its housin…
Replacing the Key Fob Battery on a Jeep Renegade
Replacing the Key Fob Battery on a Jeep Renegade
Jeep Renegade (2014-2021 / ) The video shows how to replace the battery in the key fob of a Jeep Renegade. This is a very simple operation that can be done in just a minute on yo…
How to Replace the Key Fob Battery in the Jeep Renegade?
How to Replace the Key Fob Battery in the Jeep Renegade?
Jeep Renegade (2014-2026 / MK 1, BU, 520) To replace the battery in the key fob of the Jeep Renegade, pry open the left side of the device. This will allow you to open the fob and locate the …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos