Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the battery of the Jeep Renegade?

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Battery

Video tutorial

To replace the battery of the Jeep Renegade, you need to open the hood to access the components in the engine compartment: here you will be able to locate the battery on the top right, just below the windshield on the driver's side. You will need to unscrew the screws that secure it to its housing and disconnect the power cables: the new device can then be fixed with the appropriate screws and connected to the power cables.

After installation, you can close the hood and verify that everything is functioning properly.


Posted on 23 July 2025 by ScegliAuto


Related tutorials

How to Replace the Battery in a Jeep Renegade?
How to Replace the Battery in a Jeep Renegade?
Jeep Renegade (2014-2021 / ) To replace the battery in a Jeep Renegade, open the bonnet to access the engine compartment: the battery is located inside, at the top right near the…
How to Replace the Key Fob Battery in the Jeep Renegade?
How to Replace the Key Fob Battery in the Jeep Renegade?
Jeep Renegade (2014-2026 / MK 1, BU, 520) To replace the battery in the key fob of the Jeep Renegade, pry open the left side of the device. This will allow you to open the fob and locate the …
How do you replace the power battery in the Jeep Renegade?
How do you replace the power battery in the Jeep Renegade?
Jeep Renegade (2014-2026 / MK 1, BU, 520) Suddenly we can no longer start the engine of our car? In most cases, the power battery is discharged, so we will need to change it. In our video, we…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos