Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Renegade
    4. : How do i replace the battery of the Jeep Renegade?

Jeep Renegade - Video tutorial

Model: Jeep Renegade - Years 2014-2021
Part: Battery
Operation: How do i replace the battery of the Jeep Renegade?

In order to replace the battery of the Jeep Renegade, the hood must be opened so that you have access to the engine compartment: the battery is in fact positioned inside it, in the upper right part of the windshield on the driver's side. In order to remove the battery from its housing, it will be necessary to loosen the bolts that secure it to its housing and disconnect the terminals connected to it. In this way it will be possible to insert the new battery, which must be connected to the appropriate bolts previously removed and also connected to the relative terminals.


Posted on 27 August 2022 by ScegliAuto

    Frequently Asked Questions

    • Jeep Renegade 2014-2023 - Why is start and stop in the Jeep Renegade not available? Read Answer
    • Jeep Renegade 2014-2023 - What causes the Jeep Renegade Start & Stop system problem? Read Answer
    • Jeep Renegade 2014-2023 - Why does the start and stop of the Jeep Renegade not work? Read Answer
    • Jeep Renegade 2014-2021 - What is the price of the Jeep Renegade battery? Read Answer
    • Jeep Renegade 2014-2023 - What to do when the start and stop does not work on the Jeep Renegade? Read Answer
    • Jeep Renegade 2014-2023 - Why doesn't Start & Stop work on the Jeep Renegade? Read Answer
    • Jeep Renegade 2014-2023 - Why does the "start and stop not available" light come on on the Jeep Renegade? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos