Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery of the Jeep Renegade?

Model: Jeep Renegade - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Battery

Video tutorial

In this guide, you will see how to replace the battery of the Jeep Renegade, a very simple operation. Start by opening the bonnet, then remove the battery cover and disconnect the two terminals, always starting with the negative.

To disconnect the positive terminal, you will need a 10mm spanner. Once done, use a 13mm socket to unscrew the securing bolt of the strap, and at this point, you can remove the battery.

Finally, insert the new battery and reassemble everything in reverse order, ensuring to connect the positive terminal first and then the negative.


Updated on 10 June 2026 by ScegliAuto


Related tutorials

How to replace the battery of the Jeep Renegade
How to replace the battery of the Jeep Renegade
Jeep Renegade (2014-2023 / ) Below are the step-by-step instructions on how to remove and replace the battery of the Jeep Renegade. First, open the hood of the vehicle and start …
How to Replace the Key Battery on a Jeep Renegade
Jeep Renegade (2014-2021 / ) Let's see how to replace the key battery on a Jeep Renegade. Get a new battery and a small flathead screwdriver. First, extract the metal key from th…
How to Replace the Battery in a Jeep Renegade?
How to Replace the Battery in a Jeep Renegade?
Jeep Renegade (2014-2021 / ) To replace the battery in a Jeep Renegade, open the bonnet to access the engine compartment: the battery is located inside, at the top right near the…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos