Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the power battery in the Jeep Renegade?

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Battery

Suddenly we can no longer start the engine of our car? In most cases, the power battery is discharged, so we will need to change it. In our video, we see specifically how to do this in a Jeep Renegade, using a 10 mm hex key and a 13 mm key. The first one is needed to disconnect the poles of the aforementioned battery, while the second one is used to remove the locking bracket pins. After this, we remove the battery from the engine compartment, and carefully check the compatibility of the technical data before installing the new one.

Posted on 29 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the battery of the Jeep Renegade?
How do you replace the battery of the Jeep Renegade?
Jeep Renegade (2014-2026 / 520, MK 1, BU) To replace the battery of the Jeep Renegade, you need to open the hood to access the components in the engine compartment: here you will be able to l…
How to Replace the Battery in a Jeep Renegade?
How to Replace the Battery in a Jeep Renegade?
Jeep Renegade (2014-2021 / ) To replace the battery in a Jeep Renegade, open the bonnet to access the engine compartment: the battery is located inside, at the top right near the…
How to replace the battery of the Jeep Renegade
How to replace the battery of the Jeep Renegade
Jeep Renegade (2014-2023 / ) Below are the step-by-step instructions on how to remove and replace the battery of the Jeep Renegade. First, open the hood of the vehicle and start …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos