Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the windscreen on the Jeep Cherokee?

Model: Jeep Cherokee XJ, MK 2 - Years 1984-2001
Part: Windshield

To replace the windscreen on the Jeep Cherokee, pry at the bottom of the seal around the windscreen: it must be completely detached to scrape away the adhesive that holds the windscreen in its frame. Once most of the adhesive is removed, pull the windscreen out from its seat and then remove any remaining adhesive residues. Then spread new adhesive around the entire perimeter of the windscreen, positioning it along with the corresponding seal.

Updated on 28 June 2026 by ScegliAuto

This video is currently unavailable

Related tutorials

Jeep Cherokee (2013-2023 / KL, MK 5) To replace the windscreen wiper blades on a Jeep Cherokee, lift the wiper arm and position the blade perpendicular to the arm. This will allow you to…
Jeep Cherokee (1984-2001 / XJ, MK 2) To replace the engine management control unit on the Jeep Cherokee, open the bonnet and access the engine compartment. The control unit is located di…
Jeep Cherokee (1984-2001 / XJ, MK 2) This video shows the location of the fuses and relays of the Jeep Cherokee XJ. In addition to the position of the fuses and relays, the video include…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos