Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Jeep
    3. :
  3. Cherokee
    4. : How to replace the Jeep Cherokee ECU?

Jeep Cherokee - Video tutorial

Model: Jeep Cherokee MK 2, XJ - Years 1984-2001
Part: Control unit
Operation: How to replace the Jeep Cherokee ECU?

In order to replace the Jeep Cherokee engine management unit, you need to open the hood and access the engine compartment. The control unit will be located immediately under the windshield on the driver's side and will be accessible by removing the washer fluid reservoir. The latter will be removed by loosening its fixing screws: after removal, it will be possible to disconnect all the connectors connected to the control unit and remove the latter from its housing. After removal, it will be possible to replace it with a new spare part and install the tank again.


Posted on 28 June 2022 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos