Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Key Fob Battery on a Jeep Renegade

Model: Jeep Renegade - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021
Part: Key

Video tutorial

The video shows how to replace the battery in the key fob of a Jeep Renegade. This is a very simple operation that can be done in just a minute on your own. By moving the clip, remove the emergency key. Then, using the same key, pry open the fob into two halves.

Extract the depleted battery. Insert the new 2032 battery into its compartment.

Close the fob by snapping the two halves together. Finally, replace the emergency key and check that the fob works.


Updated on 2 June 2026 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery of the Jeep Renegade?
How to Replace the Key Fob Battery of the Jeep Renegade?
Jeep Renegade (2014-2021 / ) To replace the key fob battery of the Jeep Renegade, lower the lever located at the back of the fob, just below the chrome cover. This will allow you…
Replacing the Key Fob Battery on a Jeep Renegade
Replacing the Key Fob Battery on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Today, you will see instructions on how to disassemble and replace the battery of the key fob for a Jeep Renegade in simple steps. Take your key fob …
Replacing the Key Fob Battery of the Jeep Renegade
Replacing the Key Fob Battery of the Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) In this video tutorial, you will learn how to disassemble and replace the battery of the key fob for the Jeep Renegade through these simple steps. Fi…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos