Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Key Fob Battery of the Jeep Renegade?

Model: Jeep Renegade - Years 2014-2021
Part: Key

To replace the key fob battery of the Jeep Renegade, lower the lever located at the back of the fob, just below the chrome cover. This will allow you to slide off the cover, which is connected to the key. Now, you can open the two halves of the fob to access the internal part that contains the battery. You can then remove the battery from its housing and replace it with a new spare part; finally, all components of the fob must be reassembled.

Updated on 26 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the battery of the Jeep Renegade remote control?
How do you replace the battery of the Jeep Renegade remote control?
Jeep Renegade (2014-2023 / ) To replace the battery of the Jeep Renegade remote control, you need to remove the key from the top of the device so that you can pry open its housin…
How do you replace the battery of the Jeep Renegade remote control?
How do you replace the battery of the Jeep Renegade remote control?
Jeep Renegade (2014-2026 / 520, MK 1, BU) The procedure for replacing the battery of the Jeep Renegade remote control is done by levering on the left side of the device: this way it will be p…
How to Replace the Remote Battery of the Jeep Renegade?
How to Replace the Remote Battery of the Jeep Renegade?
Jeep Renegade (2014-2026 / 520, MK 1, BU) To replace the remote battery of the Jeep Renegade, pull the switch located on the top of the device to extract the key inside. Once removed, lever i…

Other guides you may be interested in

    Frequently Asked Questions

    • Jeep Renegade 2014-2026 - Why is the electronic key no longer detected in the Jeep Renegade? Read answer

How to reset the tyre pressure warning light on the Suzuki Jimny?

To reset the tyre pressure warning light on the Suzuki Jimny, first inflate the tyres to the pressure value indicated on the corresponding sticker: this is located at the bottom of the driver's door pillar. Once the tyres are inflated, insert the ignition key and turn on the instrument panel: select the screen that indicates the tyre pressures, checking that the values change. After a few seconds, the tyre pressure warning light will automatically turn off.

Watch the video!


by ScegliAuto

More videos