Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the battery of the Jeep Renegade remote control?

Model: Jeep Renegade - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023
Part: Key

Video tutorial

To replace the battery of the Jeep Renegade remote control, you need to remove the key from the top of the device so that you can pry open its housing: in doing so, you will be able to fully open the remote control to locate the battery inside. Once the old battery has been removed, you can insert the new one into its housing: then you can close the remote control and insert the key to verify that the device is functioning correctly.


Posted on 10 May 2025 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery of the Jeep Renegade?
How to Replace the Key Fob Battery of the Jeep Renegade?
Jeep Renegade (2014-2021 / ) To replace the key fob battery of the Jeep Renegade, lower the lever located at the back of the fob, just below the chrome cover. This will allow you…
How to Replace the Key Fob Battery in the Jeep Renegade?
How to Replace the Key Fob Battery in the Jeep Renegade?
Jeep Renegade (2014-2026 / MK 1, BU, 520) To replace the battery in the key fob of the Jeep Renegade, pry open the left side of the device. This will allow you to open the fob and locate the …
Replacing the Key Fob Battery on a Jeep Renegade
Replacing the Key Fob Battery on a Jeep Renegade
Jeep Renegade (2014-2021 / ) The video shows how to replace the battery in the key fob of a Jeep Renegade. This is a very simple operation that can be done in just a minute on yo…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos