Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Front Bumper on Jeep Renegade

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Front bumper

Video tutorial

In this video tutorial, you will learn how to remove the front bumper from a 2020 Jeep Renegade. This operation is not very complex but requires attention and delicacy.

Open the bonnet and detach the clips from the grille that you see along the plastic flange: after removing the wheel, you will also need to take off the wheel arch by unscrewing the screws that attach it to the front bumper. Disconnect the two plugs and finally remove the rivets of the wheel arch with a pair of pliers: this will reveal the 7 mm screws to unscrew, and then you can proceed to remove the bumper!


Updated on 19 March 2026 by ScegliAuto


Related tutorials

How to disassemble the grille and front bumper of the Jeep Renegade
How to disassemble the grille and front bumper of the Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) In this guide, we will see the steps useful for disassembling and replacing the grille and front bumper of the Jeep Renegade. First of all, we open t…
Instructions for Removing the Rear Bumper on Jeep Renegade
Instructions for Removing the Rear Bumper on Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) In this tutorial, you will find instructions to remove the rear bumper of a Jeep Renegade. First, open the boot lid and remove the rear lights by uns…
How to Remove the Front Headlamp on Jeep Renegade
How to Remove the Front Headlamp on Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Follow these steps to remove the front headlamp on a Jeep Renegade. Open the bonnet by pulling the bonnet release lever and secure it. Using a batter…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos