Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Headlamp on Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Headlight

Follow these steps to remove the front headlamp on a Jeep Renegade. Open the bonnet by pulling the bonnet release lever and secure it. Using a battery-powered screwdriver or a screwdriver, undo the securing bolts located at the top of the bumper. Once the screws at the top are undone, remove the bolts around the splash guard and the bolts at the bottom of the bumper. Carefully pull the bumper away from the body of the vehicle. At this point, remove the damaged headlamp from the vehicle. Fit the new headlamp with new bulbs if damaged (always ensure they are the correct type and size) and insert the headlamp into its housing. Finally, reattach the front bumper and tighten the bolts. Test the lights to ensure they are functioning correctly.

Updated on 2 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Front Headlight Bulbs on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Learn how to replace the front headlight bulbs on a Jeep Renegade. Open the front bonnet by pulling the lever located at the bottom right of the dash…
How to Replace the Front Headlight Bulb on a Jeep Renegade?
How to Replace the Front Headlight Bulb on a Jeep Renegade?
Jeep Renegade (2014-2021 / ) To replace the front headlight bulb on the Jeep Renegade, open the bonnet to access the rear of the headlight corresponding to the bulb that needs re…
Changing the Headlight Bulbs on a Jeep Renegade
Changing the Headlight Bulbs on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Do you want to change the headlight bulbs on a Jeep Renegade? Follow these steps. Open the bonnet by pulling the lever located at the bottom right of…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos