Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Front Wing Removal on Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Front bumper

Lift the bonnet and insert the support rod. Remove the plastic protection under the bonnet by taking out the two clips that secure it. Now unscrew the two 10 mm screws that are now exposed. Next, move to the wheel and loosen the bolts securing it, then lift the car with a jack and remove them. Once the wheel is removed, unscrew the 10 mm screws and the clips securing the wheel arch. After removing the wheel arch, which you will need to extract by passing it around the shock absorber, you can also remove the screws and clips of the wing (as shown in the video) and extract it.

Updated on 7 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Front Headlamp on Jeep Renegade
How to Remove the Front Headlamp on Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Follow these steps to remove the front headlamp on a Jeep Renegade. Open the bonnet by pulling the bonnet release lever and secure it. Using a batter…
How to Remove the Front Indicator on a Jeep Renegade
How to Remove the Front Indicator on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Before you can start, open the bonnet of your Jeep Renegade. Begin by releasing the internal clips that secure the front indicator to the vehicle, us…
Replacing the Fog Light on Jeep Renegade
Replacing the Fog Light on Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) How to remove the fog light or bulb of the Jeep Renegade? Let’s see how to remove the cover plastics. Turn the front wheel and unscrew the securing s…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos