Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulbs of a Jeep Renegade

Model: Jeep Renegade MK 1, BU, 520 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025
Part: Headlight bulb

Video tutorial

Do you want to replace the front headlight bulbs of a Jeep Renegade? Here’s how to proceed: open the front bonnet by pulling the lever located at the bottom right of the dashboard, and secure it with the prop rod. Remove the screws on the front headlight with a socket wrench (if present) or detach the cap. Once the screws are removed, take out the inspection caps from their housing; remove the bulb holders with the metal clips and install the new bulbs.

Refit the inspection cap at the back of the headlight.

Finally, test the correct operation of the lights.


Updated on 9 March 2026 by ScegliAuto


Related tutorials

How to Replace the Front Headlight Bulbs on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Learn how to replace the front headlight bulbs on a Jeep Renegade. Open the front bonnet by pulling the lever located at the bottom right of the dash…
How to Replace the Rear Light Bulbs on a Jeep Renegade
How to Replace the Rear Light Bulbs on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Are the rear lights on your car not working anymore? Follow this guide to remove the light unit from a Jeep Renegade and replace the bulbs. Open the …
How to Replace the Rear Light Bulb on a Jeep Renegade
How to Replace the Rear Light Bulb on a Jeep Renegade
Jeep Renegade (2014-2026 / MK 1, BU, 520) Do you need to replace the bulbs in the rear light on a Jeep Renegade? Open the boot lid, unscrew the fastening screws located at the side of the lig…

Other guides you may be interested in

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos