Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Light Bulb on a Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Tail light bulb

Do you need to replace the bulbs in the rear light on a Jeep Renegade? Open the boot lid, unscrew the fastening screws located at the side of the light. Detach the rear light from its housing once all screws are removed (disconnect the power connectors) and replace the damaged bulbs with new ones by unscrewing the bulb holder (ensure the size and voltage are the same). Finally, refit the light with the screws and reconnect the power connectors. Test the bulbs to ensure they function correctly.

Updated on 15 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Number Plate Light Unit on a Jeep Renegade
How to Remove the Number Plate Light Unit on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) How do you replace the number plate light bulb on a Jeep Renegade? Use a screwdriver or plastic trim tool to remove the number plate light located in…
How to Replace the Front Headlight Bulb on a Jeep Renegade?
How to Replace the Front Headlight Bulb on a Jeep Renegade?
Jeep Renegade (2014-2021 / ) To replace the front headlight bulb on the Jeep Renegade, open the bonnet to access the rear of the headlight corresponding to the bulb that needs re…
How to replace the rear headlight bulb of the Jeep Renegade
How to replace the rear headlight bulb of the Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) If you are planning to replace one of the rear headlight bulbs of your Jeep Renegade by yourself, all you need to do is read the following guide and …

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos