Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Rear Bulb on a Jeep Renegade

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Tail light

In this video, you will see how to change the rear bulb on a Jeep Renegade. The operation is quick and simple and does not require special manual skills. Access the connections of the rear light from the boot by removing the cover with a plastic lever. You will immediately see the electrical connections and the fixing screws; the first is a plastic screw that can be unscrewed by hand. After that, you can pull the light out slightly and disconnect the electrical connections. Once done, you can work on the light; remove the four screws securing the inner cover and finally replace the damaged bulbs. The final assembly is straightforward; just follow the same steps in reverse.

Updated on 10 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Rear Number Plate Light Bulb on a Jeep Renegade
How to Replace the Rear Number Plate Light Bulb on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) Before you begin, open the tailgate of your Jeep Renegade. Start by unclipping and removing the rear number plate light from the tailgate, using a fl…
How to replace the rear headlight bulb of the Jeep Renegade
How to replace the rear headlight bulb of the Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) If the bulb in one of the rear lights of your Jeep Renegade has suddenly stopped working, don't worry because below you will find a description of al…
How to Replace the Front Headlight Bulb on a Jeep Renegade?
How to Replace the Front Headlight Bulb on a Jeep Renegade?
Jeep Renegade (2014-2021 / ) To replace the front headlight bulb on the Jeep Renegade, open the bonnet to access the rear of the headlight corresponding to the bulb that needs re…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos