Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the rear position light bulbs on a Jeep Renegade?

Model: Jeep Renegade 520, MK 1, BU - Years 2014-2026
Part: Light bulb

To replace the rear position light bulbs, as well as the brake and indicator bulbs, open the tailgate of the boot and loosen the screws that secure the light unit within its housing. Once the light unit is extracted, disconnect the connector attached to its rear. This will allow you to unscrew the screws that secure the bulb holder to the light unit, remove it, and replace the bulbs that are mounted on it. Once the new bulbs have been inserted, you can reposition the holder and the light unit back into their respective housings.

Updated on 28 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Courtesy Lights on the Jeep Renegade?
How to Replace the Courtesy Lights on the Jeep Renegade?
Jeep Renegade (2014-2021 / ) To replace the courtesy lights on the Jeep Renegade, use a flat screwdriver to detach the entire panel located behind the interior rear-view mirror. …
How to Replace the Position Light Bulbs on a Jeep Renegade?
How to Replace the Position Light Bulbs on a Jeep Renegade?
Jeep Renegade (2014-2026 / 520, MK 1, BU) As shown in this tutorial, replacing the position light bulbs on a Jeep Renegade is a very simple and quick task. Before proceeding, ensure that the …
How to Replace the Position Light Bulb on a Jeep Renegade
How to Replace the Position Light Bulb on a Jeep Renegade
Jeep Renegade (2014-2026 / 520, MK 1, BU) This guide shows how to replace the position light bulb on a Jeep Renegade. The first step is to turn the wheels to reveal a small access panel in th…

    Frequently Asked Questions

    • Jeep Renegade 2014-2026 - How to change front turn signal bulb on Jeep Renegade? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos